Key Functions

• DeviceNet to Serial Protocol Conversion:
  Facilitates real-time bidirectional data translation between DeviceNet (master/slave modes, compliant with ODVA specifications) and serial communication standards (RS-232, RS-422, RS-485). Supports popular serial protocols including Modbus RTU and ASCII, with configurable data mapping to align with specific application requirements. Transmission latency is <25ms, ensuring responsiveness in time-sensitive control tasks.

• Multi-Serial Interface Support:
  Equipped with versatile serial ports to connect diverse devices:

• 1x RS-232 port (DB9 connector): Supports data rates up to 115.2 kbps, suitable for short-distance (up to 15m) point-to-point communication with devices like HMIs, barcode scanners, or legacy controllers.

• 1x Combined RS-422/RS-485 port (terminal block): Supports data rates up to 115.2 kbps, enabling multi-drop networks (up to 32 devices) over longer distances (up to 1200m for RS-485) for connecting sensors, meters, valves, or remote I/O modules.

• DeviceNet Interface Capabilities:
  Integrates a standard DeviceNet interface (terminal block connection, compliant with EN 50325-5) with:

• Auto-adaptive baud rates: 125 kbps, 250 kbps, 500 kbps (matches common DeviceNet network speeds).

• Optical isolation (2.5kVrms) to protect against electrical noise and ground loops.

• Support for up to 63 DeviceNet slave devices (when operating as a DeviceNet master) or direct connection to a DeviceNet master (when operating as a slave).

• Configuration & Remote Management:
  Configurable via Hilscher’s SYCON.net software, allowing users to:

• Define data points and map DeviceNet I/O data to serial protocol frames.

• Import EDS (Electronic Data Sheet) files for DeviceNet devices to ensure plug-and-play compatibility.

• Perform remote configuration and diagnostics via an integrated Ethernet port, reducing on-site maintenance needs.

• Power & Protection Mechanisms:
  Features 24V DC ±6V power input (Mini-Combicon 2-pin connector) with reverse polarity protection, supporting typical current consumption of 72mA. Over-voltage and over-current protection safeguard the gateway and connected equipment from electrical faults.

Compatibility

• Supported Protocols:

• DeviceNet (master/slave modes, compliant with ODVA standards).

• Serial: RS-232, RS-422, RS-485 (Modbus RTU, ASCII).

• Compatible Devices:

• DeviceNet equipment: Sensors, actuators, motor drives, and controllers (e.g., Allen-Bradley DeviceNet products).

• Serial devices: RS-232/RS-485 sensors, meters, barcode readers, legacy PLCs, and HMIs.

• Incompatibility:
  Not designed for Ethernet-based protocols (e.g., PROFINET, EtherNet/IP) or other fieldbuses (e.g., PROFIBUS DP, CANopen) without additional hardware.

Request Custom Quote:

📧 SoulPowerjun@outlook.com

📱 +86 13306931203