Supports multiple real - time Ethernet protocols such as EtherCAT, PROFINET, Ethernet/IP, and SERCOS. It can operate in master - slave configurations, with the master functionality being unrestricted in its licensed form. It allows for seamless integration between different real - time Ethernet - based industrial networks.

Integrated Memory: Comes with 8 MB of SDRAM and 4 MB of serial flash memory. It also supports MMC or SD cards with a maximum capacity of 2 gigabytes, which can be used for storing firmware and configuration data.

Physical Dimensions: While the exact dimensions are not provided in the given sources, based on similar Hilscher products, it is likely to be compact for easy installation in industrial control cabinets.

Power Requirements: Operates on 24 V DC with a ± 6 V tolerance. The typical maximum current draw at 24 V is 130 mA, and the typical power consumption is 3.2 W.

Certification: The device is UL 508 certified, ensuring compliance with safety standards for use in industrial control equipment.

I/O Data Conversion: Achieves an I/O data conversion time of less than 10 ms, which is crucial for applications that require real - time data transfer and processing in industrial automation.

Device Exchange: Facilitates device exchange within seconds. In case of device failure, maintenance personnel can remove the memory card from the faulty unit and insert it into a spare unit, allowing the system to resume operation quickly.

NetScript Support: Supports the programming of special serial protocols using the Lua - based NetScript scripting language. A full - featured development environment is included in the product delivery, which enables the easy and rapid programming of proprietary serial protocols. It also allows for pre - processing and further processing of I/O data during the conversion to the secondary I/O field protocol.

Mounting: Designed for DIN - rail mounting (EN 60715, 35 mm), which is a common and convenient method for installation in industrial control panels.

Connector Type: Communication interfaces include two ports with Ethernet standard, supporting 100Base - TX or 10Base - T with isolation. These ports are connected via RJ45 connectors. There is also a mini - USB (5 - pin) connector for the diagnosis and configuration interface.