Explicitly supports DeviceNet protocol, operating in dual modes: DeviceNet master (max. 63 slave devices) and DeviceNet slave (for integration into upper-level DeviceNet networks). No additional protocols are listed in the official NT100-DN-DN datasheet.

Integrated Memory: 8 MB SDRAM, 4 MB serial flash; supports SD/MMC card (max. 2 GB, for configuration backup/loading) — all values are official stated parameters.

Physical Dimensions: 100 mm (W) × 52 mm (H) × 70 mm (D) (excluding connectors) — exact dimensions from Hilscher’s mechanical drawing.

Power Requirements: 24 V DC (18–36 V DC input range), typical current consumption: 120 mA (24 V DC) — official electrical specifications.

Certification: UL 508 listed, CE marked (per Hilscher’s certification document for NT100 series).

I/O Data Conversion: Cycle time <10 ms (90% step response), as verified in the NT100-DN-DN performance test report.

Device Exchange: SD/MMC card-based configuration transfer, enabling device replacement in <30 seconds (official Hilscher maintenance guide).

NetScript Support: Lua-based NetScript programming environment included (for custom serial protocol development), with Hilscher-provided IDE (version 3.2 or later) — features listed in the product’s software manual.

Mounting: DIN rail (EN 60715, 35 mm) — specified in the NT100-DN-DN installation manual; no other mounting methods are officially supported.

Connector Type: M12 female connectors (5-pin for power/communication) — exact connector specs from Hilscher’s parts list.

Request Custom Quote:

📧 SoulPowerjun@outlook.com

📱 +86 13306931203