Key Functions

• Siemens-Specific Protocol Conversion:
  Supports seamless bidirectional data translation between Siemens SIMATIC protocols (MPI, DP, PPI) and Ethernet protocols:

• PROFINET IO: Operates in device mode, compatible with PROFINET RT (real-time) for cyclic I/O data transmission, enabling integration with PROFINET controllers (e.g., Siemens S7-1500, third-party PROFINET PLCs).

• RFC1006: Implements TCP/IP-based RFC1006 protocol, supporting PG/OP communication (programming download, operator panel data exchange) with Siemens S7 PLCs.
  It handles both cyclic (real-time control signals, latency <15ms) and acyclic (configuration, diagnostics) data, maintaining compatibility with Siemens’ native communication logic.

• Multi-Connection & Device Support:

• Parallel processing of up to 16 Ethernet connections, allowing simultaneous access from multiple terminals (e.g., engineering stations, HMI panels, SCADA servers).

• Supports communication with up to 32 Siemens PLCs (S7-200/300/400) via MPI/DP/PPI, enabling large-scale PLC network integration.

• Auxiliary Service Support:
  Integrates practical industrial services to enhance usability:

• DHCP: Automatically obtains IP addresses from a DHCP server, simplifying network configuration.

• NTP: Synchronizes time with NTP servers, ensuring consistent time stamps for data logs and diagnostics.

• PG/OP Compatibility: Retains Siemens’ native PG/OP communication functions, supporting programming and debugging of S7 PLCs via Ethernet.

• MPI/DP/PPI Interface Capabilities:
  Features a 9-pin D-Sub MPI/DP/PPI interface (compliant with Siemens physical layer specifications) with:

• Optical isolation (2.5kVrms) to prevent electrical noise and ground loops from affecting communication stability.

• Auto-adaptive baud rates (MPI: 19.2 kbps - 12 Mbps; DP: 9.6 kbps - 12 Mbps; PPI: 9.6 kbps - 115.2 kbps) to match different Siemens PLC network configurations.

• Ethernet Interface Configuration:
  Equipped with 2x Gigabit RJ45 Ethernet ports (100/1000 Mbps auto-adaptive) that support:

• MRP Redundancy: Complies with PROFINET MRP (Media Redundancy Protocol) to ensure network fault tolerance, reducing downtime from cable or switch failures.

• Star/daisy-chain topologies, adapting to different factory wiring layouts.

Compatibility

• Supported Devices:

• Siemens PLCs: S7-200 (PPI/MPI), S7-300 (MPI/DP), S7-400 (MPI/DP) series.

• Ethernet Systems: Siemens TIA Portal (STEP 7, WinCC), third-party PROFINET controllers (e.g., Rockwell Allen-Bradley, Schneider Modicon), SCADA/HMI platforms (Wonderware, Ignition).

• Configuration Tools:
  Compatible with Siemens STEP 7 (including 64-bit versions) via integrated third-party drivers, and supports web-based configuration for quick parameter setting.

• Incompatibility:
  Not designed for non-Siemens fieldbuses (e.g., CANopen, DeviceNet) or non-industrial Ethernet protocols. Does not support Siemens S7-1200/1500 native PROFINET without additional configuration.

Request Custom Quote:

📧 SoulPowerjun@outlook.com

📱 +86 13306931203