Product Introduction

For 10BASE-T star configuration Ethernet networks, it's Ethernet connection is an RJ45 connection. With the exception of the primary value Modbus registers

the component supports the communication interfaces, communication protocols, and additional functionality.

The primary value Modbus registers were replaced by a Configurable Modbus Register Utility, which may now offer the same functionality.

Power Consumption

5.0 watts typical with ModbusRS232/ RS422 I/O Module

5.6 watts typical with Modbus RS485 I/O Module

Data Types

Utilizes a high-speed internal network to gather information from other modules in the rack, including current measured values with a time stamp,

module statuses, and current alarm statuses.

The exact data types returned depend on the channel configuration and module type.

Update Time: The rate of data gathering for all modules in the 3500 rack will not be greater than 1 second, depending on the design of the rack.

Protocols

BNC Host Protocol

Communication over Ethernet TCP/IP with the 3500 Configuration Software and the 3500 Data Acquisition and Display Software.

Modbus

based on the PIMBUS-300 Reference Manual for AEG Modicon. use the RTU transmission mode, or remote terminal unit.

Communication Link

Ethernet, 10Mbps, and conforms to IEEE802.3

Protocol

Ethernet TCP/IP frame and Modbus/TCP

Connection

RJ-45 (telephone jack style) for 10BASE-T Ethernet cabling

Many products have not been listed yet. Please contact us for more products If there is any inconsistency between the product model

and the displayedpicture, the model shall prevail. Please contact us for specific product pictures, and we will arrange for photos to be

taken in the warehouse for confirmation

Technical Team Service Hotline：0591-85299001